Tazer JL Mini for Wrangler JL, Gladiator JT and Wrangler JL 4xe
***Once installed, this item is not returnable as it is programmed to your vehicle.***
With the Z Automotive Tazer JL Mini, you have numerous tools at your fingertips to reprogram your Jeep for better performance, comfort and safety. This miniature ECU programmer is an essential tool for owners of the Wrangler JL and Jeep Gladiator JT. It packs more than 50 features that let you optimize factory performance or account for aftermarket upgrades.
To install your Jeep Tazer Mini, simply unplug the SGW module located above the OBD2 diagnostic connector and plug the Tazer JL Mini in its place. The features are all accessible from the dash display using steering wheel buttons to navigate the menus. It's compatible with all Jeep Wrangler JL and Jeep Gladiator JT models as well as the Wrangler JL 4xe EV.
Tazer JL features can be broken into two categories. Vehicle settings are changes made to the Jeep like tire size, gear ratios or adjusting settings to accommodate other upgrades or modifications. These changes will continue to operate after the Tazer JL Mini is unplugged. Live functions are functions the Tazer JL Mini performs live, only while plugged in. These include things such as AutoTracKill to recall traction control settings and Light Show Mode to improve visibility to others.
See below for a full list of the various Z Automotive Tazer Mini settings and functions. We have the lowest prices and fast shipping at Just for Jeeps.
Tazer Mini Vehicle Settings:
- Change Tire Size
- Change Gear Ratio
- Change Transfer case LOW ratio
- Enable/Disable TPMS system
- Change TPMS pressure warning limit front/rear (25psi-85psi)
- Enable/Disable Backup camera
- Enable/Disable Cargo Camera input (8.4 Uconnect only)*
- Enable/Disable CD (wired audio) input*
- Enable/Disable TravelLink/XM traffic and weather
- Change Daytime Running Lights (DRL) region (type)
- Change DRL location
- Enable/Disable DRL Dropout function
- Enable/Disable factory fog lights
- Enable/Disable Fog Light Dropout (when Fogs shut off while High Beams are on)
- Enable/Disable Factory Halo lights (including BCM output for adding Halo's)
- Enable/Disable One-touch lane change
- Change Headlight type (std/LED)
- Change Fog light type (std/LED)
- Change Taillight type (std/LED)
- Change Front Turn Signal type (std/LED) - supports aftermarket LED lights too
- Enable/Disable Trailer Tow setting
- Enable/Disable Aux Button settings
- Enable/Disable Blind Spot detection (if hardware is added or removed)
- Enable/Disable/Change Parksense configuration
- Disable Electronic Sway Bar (if removed from vehicle)
- Disable Front Axle Disconnect module for axle swaps
- Disable Front and Rear Lockers for axle swaps
- Disable Electronic Steering Pump for hydraulic steering conversions
- Change cluster splash screen Wrangler/Sahara/Rubicon
- Change HVAC controls setting to allow use of dual zone controls on single zone Jeep (for those upgrading the 5″ radio)
- Enable Automatic Headlamps (If hardware is added)
- Enable/Disable Panic button on the remote
- One-Touch Return-to-Stock - Quick "unmarry" function returns all vehicle settings to stock.
Tazer JL Mini Live Functions:
- AutoStopStart Disable - Remembers the last state of the auto stop/start system and will set it for you the next time you start the vehicle.
- AutoTracKill - Remembers last state of traction control system and will set it for you the next time you start the vehicle.
- Can disconnect sway bar in 2WD up to 30 mph (any speed if button mapped SwayKill is used).
- Can use backup camera and added cargo/front/undercarriage camera or media player at any speed.
- TurnCAM - Automatic backup camera when turn signals are used (8.4 Uconnect only).
- Dark Mode - Turns off all exterior lighting and dash/radio/shifter lights while parked with the engine running.
- Light Show Mode - Six preset and three make-your-own light shows that flash all the exterior lights; perfect for car shows/first responders/off-road visibility. Control from the key fob or steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal police/EMS.
- Axle Locker Control (Rubicon) - Engage lockers in 2WD and 4Hi on demand.
- TC Kill - Tuns off traction control, stability control and ABS.
- Hood Alarm - When the vehicle theft alarm is armed, monitors hood activity and will sound the alarm and flash light shows if opened.
- Cooldown Mode - Turn engine fans on demand when the ignition is on and the engine is not running.
- Line Lock - Can lock front brakes for an easy burnout.
- Rock Crawl - Can lock all four brakes by pressing steering wheel buttons to hold the vehicle still, especially helpful when off-road.
- Winch Mode - Raise idle to 2,000 RPM with a simple button press.
- Button Mapping - Use cruise up, down and right buttons as quick access to some of Tazer JL's functions when the cruise control is off.
- Display DTCs - Shows the diagnostic code(s) that are making the check engine light come on.
- Clear CELs - Reset that pesky check engine light. Good when you have mods that set the light and you know exactly why.
- 0 to 30 and 0 to 60 Timers - Displays 0-30 or 0-60 times on the EVIC display.
- Automatically blanks the license plate lights when in Reverse on Gladiators to remove glare on the backup camera at night.
- Vacuum/Boost Gauge - Watch real-time manifold pressure; great for boosted/turbo applications.
- Firmware Updates - new firmware is available periodically and always free!
***NOTE: European JLs are equipped with side mirror turn signals, which take the place of Halos in the wiring. You currently can't install Halos on European JLs.***
